Aluminum Clear Pre-Insulated Power Bars Single-Sided Conductor Entry
Type IPB-S
Suitable for use with: Class B, C, G, H, I, K and DLO Manufactured from high strength aluminum alloy Dual rated for aluminum and copper conductors, 600 Volt, 90°C NEC compliant and Wide conductor range: 1000 kcmil - 14 Sol. • Allows flexibility in the field and reduces number of connectors in inventory Multiple conductor configurations: 2 through 14 position • Choose the right connector for the application Suitable for use in panelboards, cable trays, raceways, ducts and troughs Cold temperature rated to -40ºC
listed for copper and aluminum class B and C parallel conductors*
AL9CU
Pre-filled with oxide inhibitor, prevents oxidation, moisture and contaminants from entering contact area Supplied with removable access plugs over screw and conductor ports providing protection against contaminants Pre-insulated at factory with high dielectric strength plastisol • Clear insulation allows for visual confirmation that conductor is properly inserted • Saves time, eliminates taping, reduces overall installation costs
• Abrasion and chemical resistant • Will not support combustion
SINGLE SIDED ENTRY
FIGURE DIMENSIONS (IN.)
CATALOG NUMBER
NUMBER OF CONDUCTORS
CONDUCTOR RANGE
HEX SIZE
L
W
H
IPB-NA4-2S IPB-NA4-3S IPB-NA4-4S IPB-NA4-5S IPB-NA4-6S IPB-NA4-8S IPB-NA4-10S IPB-NA4-12S IPB-NA4-14S IPB-NA2/0-2S IPB-NA2/0-3S IPB-NA2/0-4S IPB-NA2/0-5S IPB-NA2/0-6S IPB-NA2/0-8S IPB-NA2/0-10S IPB-NA2/0-12S IPB-NA2/0-14S
2 3 4 5 6 8
1.39 1.99 2.59 3.19 3.79 4.99 6.19 7.39 8.59 1.64 2.37 3.09 3.82 4.54 5.99 7.44 8.89
1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.13 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32 1.32
1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38 1.38
4 Str. - 14 Sol.
1/8
10 12 14
2 3 4 5 6 8
2/0 Str. - 14 Sol.
7/32
10 12 14
10.34
For additional wire size recommendations, see page 138 * See page 139 for parallel rating information
129
Powered by FlippingBook