Aluminum Split Bolt Connectors
Type SWA For aluminum to aluminum, copper to aluminum & copper to copper
• Made from high strength, heat treated aluminum alloy - highly resistant to corrosion • True hex design allows easy installation with standard tooling • The design provides, under torque, high contact pressure between conductors • Electro-tin plated bolt, nut, spacer, and pressure bar • Meets and exceeds requirements of the UL486A-B standard • Use of an oxide inhibiting compound is recommended with this connector
B
RANGE OF EQUAL MAIN & TAP (COPPER AND ALUMINUM)
FIGURE DIMENSIONS (IN.)
CATALOG NUMBER SWA-7 SWA-8 SWA-10 SWA-11 SWA-12
TORQUE (IN-LBS)
L
W
B
A
6 Sol. - 1/0 Str. 2 Sol. - 2/0 Str.
1.81 2.12 2.63 2.91 3.28
1.00 1.12 1.50 1.63 1.81
.75 .88 .19
.38 .42 .58 .75 .83
385 390 650 650 825
L
1/0 Str. - 250 kcmil 2/0 Str. - 350 kcmil 3/0 Str. - 500 kcmil
1.31 1.44
A
RUS accepted *UL486A-B listed with 2 Sol. cu
W
Copper Service Entrance Connectors
For use with copper wire or cabl e Type SX
• Manufactured from electrolytic copper for maximum conductivity and strength • Silicon bronze slotted hex screws allow for ease of installation with either screwdriver or wrench
FIGURE DIMENSIONS (IN.)
CATALOG NUMBER
CONDUCTOR RANGE
L
W
H
SX-12
12 Str.
.28 .30 .41 .48 .75
.25 .26 .34 .40 .47
.37 .48 .68 .79 .93
SX-10-8 SX-8-6 SX-6-4 SX-4-2
10 Str. - 8 Str. 8 Sol. - 6 Str. 6 Sol. - 4 Str. 4 Sol. - 2 Str.
RUS accepted
159
Powered by FlippingBook