INSULATION PIERCING
Insulation Piercing Connectors Type IPC • Applications: Splicing, Taps, Dead Ends, Metering • Dual rated for insulated copper and aluminum wire • For outdoor or indoor installation on energized conductor (tap must not be under load) • Exclusive RED “Turbo Spacer” keeps tap side open while main conductor is being tightened • Easy to install - captive hardware allows for single wrench installation, no special tools required • Suitable for solid and/or stranded conductors • Double shear-head bolts ensure proper torquing every time • Connections are sealed by an integral rubber grommet • Installations are watertight and corrosion free • Totally insulated connectors eliminate need for tape or covers • No contact at any point during installation with a live part • UV stable • Rated for 600 V, 90º C applications
Meets ANSI C119.4 and ANSIC119.5 Requirements
486A-486B AL9CU
APPROXIMATE DIMENSIONS (IN.)
CONDUCTOR RANGE
CURRENT RATING (AMPS)
CATALOG NUMBER
TORQUE (INCH-LBS)
BOLT HEAD SIZE (IN.)
NUMBER OF BOLTS
MAIN 2/0 - 6
TAP
COPPER
ALUMINUM
H
W L
IPC-2/0-10* IPC-750-10*
8 - 14 10 - 14 2 - 10 1/0 - 8 2 - 10 4/0 - 4
55 55
40 40
2.87 1.54 2.16 4.13 2.40 2.76 3.58 2.01 3.03 3.66 2.01 3.03 3.66 1.73 2.76 4.09 2.64 3.46 5.16 3.11 5.04 5.28 3.11 5.04 5.28 2.91 5.04 5.47 3.58 5.75
80 80
1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8
1 1 1 1 1 1 2 2 2 2
750 - 3/0
IPC-1/0-2
1/0 - 8 1/0 - 8 4/0 - 3 250 - 1
190 190 190 405 570 405 570 700
150 150 150 315 445 315 445 545
100 160 125 160 330 330 330 330
IPC-1/0-1/0 IPC-4/0-2* IPC-250-4/0 IPC-350-350 IPC-500-4/0 IPC-500-350 IPC-750-500
350 - 1/0
350 - 1/0
(500) 350 - 2/0
4/0 - 4
500 - 4/0
350 - 1/0 500 - 250
(750) 500 - 250
*Cannot be used as a splice Connectors are not approved for submersible applications Not recommended for use with extra-flexible, fine stranded cables End cap on main side must be removed to reach maximun wire size shown shown in parenthesis
202
Powered by FlippingBook