Type CH (continued)
FIGURE DIMENSIONS (IN.)
CATALOG NUMBER (WITH STAINLESS STEEL MOUNTING HARDWARE) CH1/0-1414-12-SSH CH1/0-516516-12-SSH CH1/0-3838-12-SSH CH1/0-716716-12-SSH CH1/0-1212-12-SSH CH1/0-5858-12-SSH CH2/0-1414-12-SSH CH2/0-516516-12-SSH CH2/0-3838-12-SSH CH2/0-716716-12-SSH CH2/0-1212-12-SSH CH2/0-5858-12-SSH CH3/0-1414-12-SSH CH3/0-516516-12-SSH CH3/0-3838-12-SSH CH3/0-716716-12-SSH CH3/0-1212-12-SSH CH3/0-5858-12-SSH CH4/0-1414-12-SSH CH4/0-516516-12-SSH CH4/0-3838-12-SSH CH4/0-716716-12-SSH CH4/0-1212-12-SSH CH4/0-5858-12-SSH CH4/0-3434-12-SSH CH4/0-7878-12-SSH
COPPER CONDUCTOR SIZE / CLASS
REFERENCE COMPRESSION TERMINAL LUG
STUD HOLE SIZE (EACH END)
W
L
Y
C
D
BLY25-L1 BLY25-L2 BLY25-L BLY25-L6 BLY25-L3 BLY25-L4 BLY26-L1 BLY26-L2 BLY26-L BLY26-L4 BLY26-L3 BLY26-L12 BLY27-L3 BLY27-L2 BLY27-L BLY27-L6 BLY27-L1 BLY27-L15 BLY28-L1 BLY28-L2 BLY28-L BLY28-L6 BLY28-L12 BLY28-L13 BLY28-L14 BLY28-L15
1/4
.85 .85 .85 .85 .85 .90 .94 .94 .94 .94 .94 .94
2.05 2.05 2.05 2.05 2.09 2.31 2.32 2.32 2.32 2.32 2.32 2.54 2.46 2.46 2.46 2.63 2.46 2.63 2.76 2.76 2.76 2.76 2.76 2.76 2.96 2.96
1.63 1.63 1.63 1.61 1.65 1.80 1.84 1.84 1.85 1.84 1.85 2.01 1.94 1.94 1.94 2.11 1.93 2.05 2.20 2.20 2.20 2.19 2.19 2.19 2.33 2.34
.42 .42 .42 .42 .45 .62 .47 .47 .47 .47 .47 .72 .51 .51 .51 .51 .51 .70 .56 .56 .56 .56 .56 .56 .56 .77
.28 .34 .40 .46 .53 .66 .28 .34 .40 .46 .53 .66 .28 .34 .40 .46 .53 .66 .28 .34 .40 .46 .53 .67 .79 .90
5/16
1/0 AWG Class A, AA
3/8
7/16
1/2 5/8 1/4
5/16
2/0 AWG Class A, AA
3/8
7/16
1/2 5/8 1/4
1.05 1.05 1.05 1.05 1.05 1.05 1.15 1.15 1.15 1.15 1.15 1.15 1.27 1.27
5/16
3/0 AWG Class A, AA
3/8
7/16
1/2 5/8 1/4
5/16
3/8
4/0 AWG Class A, AA
7/16
1/2 5/8 3/4 7/8
Ordering Information: • Cable harness length can range from 2” up to 96”
• The “12” in the catalog number indicates a standard length of the cable harness • To order other lengths, substitute the “12” with the desired length dimension in inches • Hardware consists of steel (suffix “-STL”) or stainless steel (suffix “-SSH”) screw/bolt, flat washer and hex nut as shown • Hex head bolts will be provided on 1/4” diameter hardware and larger • Standard bolt length is 1” - for other lengths, contact factory • To order without mounting hardware, omit suffixes “-SSH” and “-STL” from catalog number • Standard harnesses have same size mounting holes on each end • Custom variations can be ordered by changing the stud sizes within the catalog number as shown below • Example: A 12” long #2 AWG cable harness which will accommodate 1/4” and 3/8” stainless steel mounting hardware, catalog number will be CH2-1438-12-SSH
247
Powered by FlippingBook